Detailed description:

Features:

Full voltage input: AC100-47-250 v / 63 hz

Compact design, small size

Protection function: SCP/OCP/OTP

High reliability, low power consumption, high efficiency

Input/output is completely isolated

100% full load aging

1 year warranty

Technical specifications:

Project parameters

Lose out

The output

A DC27V output voltage

The rated current is 3.5 A

Ripple noise (Vp - p) 80 mv

24.0-28 v output voltage adjustable range

Linear adjustment rate was 0.4%

0.4% load regulation

Output the output voltage of DC12V

The rated current is 2 a

Linear adjustment rate was 0.3%

0.3% load regulation

Output three DC380V + 10 v output voltage (with the input isolation)

The rated current is 0.6 A

Ripple noise (Vp - p) 10 v

The startup time < 2.0 S @ 115 vac < 2.0 S @ 230 vac at Full load

Maintain time > 20 ms @ 230 vac at Full load

Lost in the

To lose

Into the AC100-240 v input voltage

47-63 hz frequency

Efficiency of 86% @ 230 vac

3.2 A @ 100 vac input current (MAX)

Surge current < 30 a @ 230 vac, full of cold start

Leakage current < 0.5 mA @ 230 vac

To protect

Burp S.C.P OUT1 type protection, automatic recovery

O.C.P OUT1 130% Iout

45 ℃ environment temperature 0-100% load and 70% load > 45 ℃

Storage temperature - 20-85 ℃

Temperature rise < K80

Reference standard EN60950 safety standards; GB4943; UL60950

Withstand voltage I/P - O/P: 1.5 KVAC I/P - FG: 1.5 KVAC O/P - FG: 0.5 KVAC

Insulation resistance I/P - O/P, I/P - FG, O/P - FG: 100 m or higher Ω / 500 VDC

EMI conduction and radiation Meet FCC. PART15. CLASS B; EN55022 CLASS B

Meet EMC standard GB/T 17626.4, 5 LEVEL3 EN61000-4-4, 5 LEVEL3

Other exterior size (L * W * H) mm 155 * 82 * 50

Natural air cooling mode

Connection terminals output: XY306A, input: XY305B

Weight & packing

Note: all technical parameters test condition no special statement is on by default: input AC230V, output rated load and measured under the condition of the environment temperature is 25 ℃. Ripple noise test conditions: open 20 MHZ bandwidth limitations, the ends of the test probe 0.1-47 uf capacitance in parallel. Switching power supply as a whole machine equipment one of the accessories, if need EMC certification, the machine equipment need to do EMC standards certification.